MODEL B600A Backhoe recommended for 18to 35 hp PTO tractors specifications

A

Maximum digging depth

Digging depth with 2’ flat bottom

6’6”

6’0”

B

Reach from swing pivot

9’0”

C

Transport height

5’3”

D

Bucket clearance or loading height

5’0”

E

Bucket curl

165°

F

Swing arc

140°

G

Stabilizer spread folded down in operating position

7’0”

H

Stabilizer spread folded up in transport position

5’8”

I

Hydraulic system is a four lever six-spool control valve with main circuit relief set at 2000 PSI. System requires a minimum of 3.5 GPM and a maximum of 4.5.0 GPM of hydraulic fluid for best operation. (Some tractors will require a hyd. Adaptor block for access into the tractor’s hyd. System.

1.    Boom lifting power (boom straight out dipper stick at 90° down)

2.    Boom lifting power (boom and dipper stick straight out)

3.    Bucket power (fully curled at cutting edge)

4.    Crowd power at end of dipper stick

5.    Bucket  pryout power (partially curled)

 

 

 

 

640lbs.

375 lbs.

1,870 lbs.

1,728 lbs.

4,076 lbs.

J

Rigid mount for maximum digging power. Category I 3pt hitch mount & selected quick detach frame kits for lawn and garden tractors.

K

Hydraulic cylinders are equipped with Nitro Steel corrosive resistant black shafting.

L

Rubber swing shock absorbers.

M

All pins are locked in place and with grease zerk.

N

Safety transport boom flip over lock.

O

Replaceable, steal wear bushings at all major pivot points

 

Specifications will vary with tractor model and are based on boom pivot 11” above ground level.

Tractors with cabs must have at least 24” minimum clearance between the end of the lower links and the tractor cab. Operator must have at least 8” clearance between his back and the tractor cab. Tractor should be equipped with a front-end loader or equivalent front-end weight for safe and stable operation. Your dealer must determine which Backhoe, 3pt and/or Tractor Frame Mount Kit and Tractor combination, best suits the Owner’s operation.