Hydraulic Transfer -  Available in 8” & 10”, the Hydraulic drive Under-Semi Transfer Auger comes with variable speed control valve and 3’x4’x10-3/4” high hopper. The 10” Double Drive Transfer Auger feature 2 orbit hydraulic motors providing smoother, faster operation. Double drive eliminates the U-Joint.

 

Gas/Electric Transfer Augers

Gas Drive – Gearbox (1.5 : 1 Reduction w/13” gearbox Pulley) 7172710355 Motor and Motor Pulley not included

·         8” Gas Drive Transfer Auger (Motor REQ 5hp, motor pulley 3”-4”)

·         10” Gas Drive Transfer Auger (Motor REQ 7.5hp, motor pulley 3”-4”)

·         8” Electric Drive Transfer Auger (Motor REQ 3hp, motor pulley 3”-4”)

·         10” Electric Drive Transfer Auger (Motor REQ 5hp, motor pulley 3”-4”)

 

9” Poly Transfer – This lightweight 9” Poly Transfer Auger offers corrosion resistance and an adjustable discharge angle. At approximately 8’4” in length, it can be stored crosswise on your semi for transport.

 

Inclined Hopper –  (PN#’s: S08-6 & S10-6) 8” or 10” diameter (6 FOOT TUBE SECTION) shipped with pivot wheels, rubber hoper extension, safety shields, LESS drive, and wheel kit. Use with HYDRAULIC or ELECTRIC drive, with optional WHEEL KIT for use independent of auger.

 

Inclined Hopper – (PN#’s: S08-9, S10-9 & S13-10) 8” or 10” diameter with 9’ TUBE/ 13” diameter with 10’ TUBE shipped with pivot wheels, rubber hopper extension, safety shields, LESS drive, and wheel kit. Use with HYDRAULIC (8” or 10”) or ELECTRIC drive. Optional WHEEL KIT allows use independent of auger.

 

Low-Profile Transfer Hopper – (PN#’S: S10-6LP, S10-9LP & S13-10LP) with four wheels, rubber hopper extension, safety shield, LESS drive, and wheel kit. Use with HYDRAULIC or ELECTRIC drive (10” only).

 

Hydraulic Drive – (PN#’s: H08-2 & H10-2) fits 8” & 10” hoppers. Shipped with hydraulic motor (CHARLYNN 2000 series or equivalent), mounting bracket, drive connector, LESS hose and hose connectors.

 

Electric Drive – (PN#’s: H08-3, H10-3 & H13-3) fits all style hoppers. Shipped with adjustable motor mount, large double pulley on 8” and 10” models, triple pulley on 13” models, belts, shield, LESS motor and motor pulley.

 

Wheel Kit – (PN#’s H08-4, H10-4 & H13-4) fits all style hoppers. Shipped with 4.00 x 8 wheels/tires and adjustable carriage. Allows use of hoppers independent of auger when equipped with HYDRAULIC or ELECTRIC drive.

 

Hopper Tarp – hardware included.

·         A160 fits S08/S10 & MK80/100 standard hoppers

·         A167 fits S13 & MK130 standard hoppers

·         A184 fist MK100/MKX130 low-profile hoppers

·         A285 fits WR/TFX2 8/10” Intake hoppers *NEW*

·         A286 fits WR/TFX2 13” Intake hoppers *NEW*