Use E61 or E63 kits to convert 31’ SD and all MD drive augers to EMD drive. Kits include electric motor mount, tube clamps, double 12.7” pulley and belts, gearbox with mount, driveshaft extension with connectors, shields, short cross member – LESS electric motor and switches, and motor pulley.  Recommended motor pulley size with 1750 RPM motors: 6.5” to 7.5” on the MD, 4” to 4.3” on the SD.

 

 

Use E64 or E66 kits to convert 36’ to 51’ PTO-BD and PTO-SD to EMD drive. Kits include electric motor mount, double 12.7” pulley and belts, shields, short cross members, LESS electric motor and switches, and motor pulley. Recommended motor pulley size with 1750 RPM motors: 6.5” to 7.5” on the BD, 4” to 4.3” on the SD.

 

Use E67, E68, E69. E70 OR E71 kits to convert the following augers from PTO-SD to electric drive. Kit includes electric motor mount, tube clamps, triple groove 15” pulley and belts, shields LESS electric motor and switches, and motor pulley. Recommended motor pulley size with 1750 RPM motors: 4.3” to 4.5”.

 

NOTE: If intake becomes too heavy, gearbox and electric motor mount may be moved further up the auger tube, using shorter driveshaft. Remember to have enough weight on the intake to prevent upending.