#21006 Hammer LM40 – Hydraulic continuous chain drive, 300 lb. hammer weight (500 lbs. max.), 40” stroke, up to 35 strokes per minute, drives t-post up to railroad ties. Integrated post puller to be used with log chain. Includes 96” length hoses with flat face couplers. See Front-End Loader Hose Kit for connection to rear tractor remotes.

#21006L Hammer LM40 with Weight Kit – Includes Factory-Installed Additional Weight Kit

#21007 Hammer LM40 with Grapple – Grapple for one-man operation.

#21007L Hammer LM40 with Grapple with Weight Kit – Includes  Grapple and Factory-Installed Additional Weight Kit

#21008 Hammer LM40 with Tilt – Tilt left or right up to 20°. Includes diverter switch and cigarette lighter adapter that connects to a power port or cigarette lighter inside the cab.

#21008L Hammer LM40 with Tilt with Weight Kit – Includes Tilt and Factory-Installed Additional Weight Kit

#21009 Hammer LM40 with Grapple and Tilt

#21009L Hammer LM40 with Grapple and Tilt with Weight Kit – Includes Grapple, Tilt and Factory-Installed Additional Weight Kit

 

Model LM40

LM40 with Weight Kit

Model LM40 w/Grapple

LM40 w/Grapple & Weight Kit

Model LM40 w/Tilt

LM40 w/Tilt & Weight Kit

Model LM40 w/Grapple & Tilt

LM40 Grapple, Tilt with Weight Kit

Overall Length

45.5”

Overall Width

25”

Overall Height

64”

Tilt (side-side)

N/A

20° in each direction

Machine Weight

946 lbs (1146 lbs w/additional weight)

986 lbs (1186 lbs w/additional weight)

1076 lbs (1276 lbs w/additional weight)

1116 lbs (1316 lbs w/additional weight)

Hammer Weight

300 lbs (500 lbs Max)

Length of Stroke

40”

Max. Strokes

35 per minute

Hydraulic Requirements

1,500-3,000 PSI

*12-30 GPM

*Hammer will still operate on machines with less than 12 GPM with fewer strokes per minute.

Post Dimensions

T-post to RR Tie

NOTE: If post/pipe diameter is 4” O.D. or smaller, PN 21212 or PN 21395 must be installed.

Max. Post Width

8.5” x 9.25”

Impact Force

82,000 lbs @ 500 lb weight

Impact Energy

1,025 ft-lbs @ 300 lb weight

1,709 ft-lbs @ 500 lb weight

NOTE: Recommended 75 HP or above tractors. DO NOT exceed the tractor loader Rated Operating Capacity. Use sufficient counterweights.