SmoothCut PTO Powered Stump Grinders

Economical and Efficient PTO powered stump grinder, makes stump removal fast and easy. Operator easily controls the stump grinder from the comfort of the tractor seat.

Features

Maneuverable - goes anywhere a tractor can; gets into tight places. Higher productivity via it's unique cutting wheel design. Cutting wheel design provides a smoother cutting action. Easy to operate - hydraulic controls allow easy operation from the tractor seat using existing tractor hydraulic controls. Durable carbide-tipped cutting teeth are economical and easy to replace. Harden bushings used in major pivot points for increased reliability. Grease zerks provided at major pivot points for extended service life. Standard needle valve for precise control of cutting feed rate for best cutting action. SureFoot stabilizer bar provides solid footing during operation. Rubber deflector helps control chips and debris during grinding. Parking stand for easy storage. SmoothCut Specifications Model SG-26 Model SG-36 Hitch Cat. I Cat. I/II Overall Length (est.) 75-inches 80-inches PTO driveline type Series 5 Series 6 PTO speed ----------540 rpm---------- Driveline protection ---------Slip Clutch---------- Gearbox rating/ratio 60 hp / 1:1.5 100 hp / 1:1.46 Cutting wheel construction --Welded 2-piece laminated steel-- Cutting wheel thickness ----------¾"---------- Cutting wheel diameter 26-inches 36-inches Cutting wheel speed (approx.) 801 rpm 5,515 ft./min 788 rpm 7430 ft./min Number of teeth 30 39 Cutting teeth construction ------Carbide Steel Bolt In------ Cutting height above ground 18-inches 18-inches Cutting depth below ground 10-inches 10-inches Max. cut depth per pass 5-inches 8-inches Maximum horizontal cut 28-inches 33-inches Swing arc 45-degrees 45-degrees Minimum HP requirement 22-PTO hp 45-PTO hp Maximum HP 50-PTO hp 100-PTO hp Weight (est.) 660-lbs. 880-lbs. Computer product number 811500 811550 Computer product number 811500 811550 * Be Sure front of tractor is properly counterbalanced with front-end weights or front-end loader. Visit Worksaver's website