HYDRAULIC CENTER MOUNT

This heavy duty driver is ideal for rolling terrain where vertical alignment needs adjustment for almost each post. The models HPD-16 SHC , HPD-20 SHC and HPD-24 SHC heavy duty design allows the operator to quickly align post and reduce tractor shock. The positioning pivots are built to withstand shock loads drivers produce during operation.

Fast and easy alignment is accomplished by two large 3" x 6" hydraulic cylinders. A separate two spool valve is easily accessible to the operator. One valve operates the fore and aft positions and the other operates the side to side positions. This valve operates on either open-center or closed-center hydraulic systems to match the operators tractor system, too. The "SHC" driver has stabilizer legs as standard equipment. The stabilizer legs are made of 2.5" x 2.5" tubular steel. They have independent height adjustment to allow for differences in terrain. The legs help to dampen the tractor tire bounce and reduce the hitch lift arm movement

Model:	HPD-16 SHC	HPD-20 SHC	HPD-24 SHC
Maximum post size:	7 in x 9 ft	8-3/4 in x 10 ft	11 in. x 10 ft.
Impact at full stroke:	32,000 lbs.	80,000 lbs.	110,000 lbs.
Impact at half stroke:	16,000 lb.	40,000 lb.	N/A
Minimum tractor size:	30 pto hp	50 pto hp	45 pto hp
Rear hitch type:	Cat. I and II		Cat. II
Drive cylinder size:	2 in x 56 in	2 in x 68 in	2 - 3" x 6"
Operating range:	50" to 116"	50" to 128"	N/A
Tilt adjustment (front/back):	17° from vertical
Tilt adjustment (side/side):	20° from vertical