MANUAL POSITIONING DRIVER

If you have a small amount of fence to build or replace, then the models HPD-16 and HPD-20 are the ones for you. If you have a large amount of fence to build, then these drivers are ideal for terrain requiring little alignment adjustment. The heavy duty adjusting base is built to withstand shock loads drivers produce during operation. Both drivers use two manual adjustable, deep-threaded, plated cranks. One crank adjusts the fore and aft positions. Another crank adjusts the side to side positions. Grease zerks are located on all pivoting members.

STANDARD STABILIZER LEGS
  • Eliminates Tractor tire bounce.
  • Reduces driver movement.
  • Adjustable for different working heights.
  • Driver is self-standing.
  • Allows inside storage.
 








Model:HPD-16HPD-20
Maximum post size:5 in x 9 ft8¾ in x 10 ft
Impact at full stroke:32,000 lbs.80,000 lbs.
Impact at half stroke:16,000 lbs.40,000 lbs.
Minimum tractor size:22 pto hp35 pto hp
Rear hitch type:Cat. I and II
Drive cylinder size:2 in x 56 in2 in x 68 in
Operating range:50" to 116"50" to 128"
Tilt adjustment (front/back):10° from vertical
Tilt adjustment (side/side):17° from vertical


Back to Previous Page Return to Products ListNext Page